**NEW**

MEDIUM

ENTA MEDIUM SNAKE TRAP
(EN-1907)

FOR SNAKES UP TILL 5 metres

Model: EN-1907

Length: 1220mm 
Width: 500mm 
Height: 200mm
Weight: Approx. 5 kg

Description: This trap is designed and constructed for trapping medium size snake in mind. Suitable for pythons, cobras, vipers, water moccasins, rattlesnakes & copperheads.

Key Features:

• Galvanised mesh
• Flip gate design
  
• Top release door
• Rectangular design for easy storage
• High success rate

Features: EM-1907 uses the flipping gate design entrance which snakes can enter but not exit. Flipping gates are located at both ends of the trap to allow snake entry from either ends. You can bait it with live frog, mouse or eggs, but generally if the traps are placed right, it can catch snakes on its own as snakes are channelled into the trap. Allows thick snakes like water moccasins, python or rattle snakes to enter.

Ideal places to set the trap should be along a fence, a wall, sides of a pond or stream, against a structure like a house or shed which can channel snakes into the trap. This trap is best to use outside. It can be set along waterways such as streams and rivers.

Release door located at the top of the trap for easy removal of snakes.

Note: After setting trap, it is important to check the trap daily for any trapped creatures. Always provide food, water and shelter for any creatures held in captivity.

**NEW**

ENTA SNAKE RESCUE/RELOCATOR BAG WITH STAINLESS STEEL HANDLE/POLE
(EN-1906)

Model: EN-1906

Pole Length (Tip to Tip): 1050mm
Pole (Material): Stainless steel
Bag Length: 1400mm
Bag Width: 700mm
Bag (Material): Tough cotton

Description: This snake bag is designed and constructed by a professional snake relocator for rescuing/relocating snakes in a easy, quick & safe manner. This is especially important when dealing with venomous snakes.

Features: EN-1906 is made of tough dark coloured cotton fabric and sewed with industrial thread to prevent snakes from escaping. The dark coloured fabrics calm and attract snakes into the bag without much assistance.

The long length bag of 1.4m allows big snakes (Python) / venomous snakes (Cobra) to be bagged securely and safely.

The stainless steel handle with WIDE penta shaped mouth opening is the largest in the industy and allows the handler a much easier time to get the snake into the bag. The penta shaped design works great at corners and along walls making it the easiest and safest to use. Made of high quality stainless steel making it easier to clean and you may only need to buy one in your lifetime as it is built to last.

The Snake bag has a quick tie drawstring design and coupled with a lockable zip at the end making the entire bagging process easy, quick & safe. This is especially important when dealing with venomous snake.

Note: Always use the right equipment/tool to prevent unnecessary injuries to yourself and the snake.

**NEW**

LARGE

ENTA LARGE SNAKE TRAP
(EN-1029)

FOR SNAKES UP TILL 6 metres

Model: EN-1029

Length: 750mm (Singly), 1500mm (Combined)
Width: 280mm
Weight: Approx. 5.3 kg (Singly), 11.5kg (Combined)

Description: This trap is designed and constructed for trapping large size snakes in mind. Some snakes like python can range from 3 to 6m and can even reach 10m. Our large snake traps are designed to trap snakes up to 6m. Suitable for pythons, cobras, vipers, water moccasins, rattlesnake & copperhead.

Features: EN-1029 can operate singly and trap snakes up to 3m. Middle locking gate mechanism connects 2 single snake traps back to back to increase the trapping capability to 6m.

Made from sturdy, durable steel mesh material for frequent repeating usage. Trapped snakes can be easily identified from outside and the entire cage can be lifted at the middle locking mechanism to be transported away.

Eggs, frogs, rats can be used as baits and placed into the snake trap to lure snakes into the trap.

Front Release door with lockable staples for secure trapping and release of snakes.

Note: After setting trap, it is important to check the trap daily for any trapped creatures. Always provide food, water and shelter for any creatures held in captivity.

**NEW**

MEDIUM

ENTA MEDIUM SNAKE TRAP
(EN-1028)

FOR SNAKES UP TILL 2 metres

Model: EN-1028

Length: 1200mm
Diameter: 300mm
Weight: Approx. 1.2 kg

Description: This trap is designed and constructed for trapping medium size snake in mind.

Features: EM-1028 uses funnel design entrance through which snakes can enter but not exit. Double funnels are located at both ends of the trap to allow snake entry from either ends. You can bait it with frog, mouse or eggs, but generally if the traps are placed right, it can catch snakes on its own as snakes are channelled into the trap.

Ideal places to set the trap should be along a fence, a wall, sides of a pond or stream, against a structure like a house or shed which can channel snakes into the trap..

Release door located at the top of the trap for easy removal of snakes.

Note: After setting trap, it is important to check the trap daily for any trapped creatures. Always provide food, water and shelter for any creatures held in captivity.

**NEW**

SMALL

ENTA SMALL SNAKE GLUE TRAP
(EN-1027)

FOR SNAKES UP TILL 1 metre

Model: EN-1027

Length:800mm
Height: 70mm
Weight: Approx. 450g

Description:

This trap is designed and constructed for trapping small size snake in mind. Each trap consist of
- 1 x Snake glue box
- 2 x Snakey glue boards.

(You may require additional/replacement Snakey Glue boards for additional capture of snakes)

Features: EN-1027 is constructed out of sturdy hollow core plastic board to allow snake entry from either ends. Snakey glue boards are inserted into Snake glue box for trapping snakes.

Snakey glue boards is constructed with plywood and covered with powerful slow drying adhesive, No matter how the snake struggles, it just can't free itself from the trap unlike those made from plastic.

Ideal places to set the trap should be along a fence, a wall, sides of a pond or stream, against a structure like a house or shed which can channel snakes into the trap..

Releasing Snakes in Glue Traps

You don’t have to kill the snakes as not all are poisonous or dangerous. You can easily and safely relocate it to the wild again. Locate a natural habitat that is far away from human population. Place the snake glue trap on the ground and open the flaps. Use cooking spray or pour any cooking oil on the snake, which is stuck to the sticky snake glue board. Keep your distance from the snake when it is working itself free as it may bite once released.  The snake will work itself free and slither off within minutes. Remaining glue on the skin will be shed off when the snake shed its skin. You can then rinse off and re-use the trap.

Note: After setting trap, it is important to check the trap daily for any trapped creatures. Always provide food, water and shelter for any creatures held in captivity.

**NEW**

ENTA SNAKEY GLUE BOARD REPLACEMENTS
(FOR USE WITH EN-1027)

Model: EN-9804

L290 x W154
Weight: Approx. 0.2kg
Each pack contains 2 Traps

Description: Snakey Glue board is made with plywood coated with weather resistance glue for trapping small size snake in mind. Each pack consist of
- 2 pcs Snakey glue boards.

Features: Snakey glue boards is constructed with plywood and covered with powerful slow drying adhesive, No matter how the snake struggles, it just can't free itself from the trap unlike those made from plastic.

Extra strong adhesive power designed for trapping snake in mind.

**NEW**

ENTA SAVILO SNAKE POWDER
(EM-190)

Model: EM-190

Weight: Approx. 3kg and 1kg packing

Description: SAVILO snake powder is composed of finely milled fossilized shells of minuscule organisms called shell powders. The microscopically fine, sharp edges desiccate the snakes’ moist exterior skin upon contact and the snakes will dehydrate and die within 2 to 36 hours. The snakes also die when they eat the dust.

Application: Sprinkle a light layer of snake powder in areas where snake frequent, including sinks, windows and door frames, gardens, sewer pipes and drains, and in cracks and crevices. Repeat treatment as needed.

As long as the powder remains in an area, any snake that gets to it will be killed. All you need is to make the powder bound to any surface that requires protection. We recommend the Scatter box or Dustin Mixer or mix the powder with water and spray or paint onto the surfaces.

**NEW**

ENTA SNAKE TONGS
(EM-1905)

Model: EM-1905

Length: 110cm and 132cm

Description: Made of aluminum/titanium alloy and fully anodized in deep blue colour and finished off with a high gloss lacquer which will not chip, fade or peel-off unlike conventional paint, giving it a professional and resilient finish.

**NEW PRODUCTS**

EMIT SNAKE & SCORPION REPELLENT SPRAY
(EM-1735)
HOME/ RESIDENTIAL/ OFFICES/ FACTORIES

CONTENT: 450ml

Copyright © 2023 by EMIT TECHNOLOGY. All rights Reserved.

Model: EM-1735

Description:
EMIT SNAKE & SCORPION REPELLENT SPRAY

EMIT Snake & Scorpion Repellent Spray is a ready-to-use aerosol light foamy formulation. When sprayed, it generates a fine wet misty foam with strong peppermint odour that adheres/penetrates wood, fabric, porous material to give residual repellent effect of 2 weeks. Regular spraying is essential to recharge repellency effect as it will wane under sunlight and thru daily diffusion to surrounding air.
(Test spray at inconspicuous area to check for staining before mass application)

TARGETS:Snakes, Scorptions, Centipede

CONTENT: 450ml

ACTIVE INGREDIENTS:
• Prallethrin............................................................1.0% w/w
• Deltamethrin.........................................................0.5% w/w
• Essential Oils (Blend),........................................3.0% w/w
OTHER INGREDIENTS:
• Determined as Non-hazardous...........................95.5% w/w
TOTAL ..............................................................100%

FOR USE:
Prevent Snakes, Scorpions, Monitor lizards, Centipedes, entry, foraging and nesting. Suitable for use in homes, barracks, factories, vehicles, retail stores & garages.

• To prevent nesting.
• To form a protection barrier around tents.
• To stop potential snake attack or chase away snake.

HOW DOES IT WORK
Warehouses, tents, factories & homes are often good resting places for snakes, scorpions & centipedes. They like to rest in WARM & MOIST places like wood planks, machineries, tents and inside shoes. Snakes have poor eyesight and depend greatly on their keen sense of smell to move around.
(1) This formulation contains a potent blend of pyrethroids that is excellent against cold-blooded reptiles and invertebrates like scorpions, spiders, lizards, frogs & centipedes. While pyrethroids itself control cold blooded reptiles, it also controls the food source of the snake like frogs.
(2) This formulation contains essential oil and coats the sprayed area with a bitter and spicy taste. These bitter and spicy oils affect their olfactory glands, pectines, and act as a barrier to prevent entry & nesting. It also repels rodent which is a food source for snakes.

DIRECTION FOR USE
Shake Well Before Use.
Shake can well. Hold can 15-20cm from surface and spray surface until covered with mist foam. Do not sleep or sit directly on treated surfaces. DO NOT spray on areas frequent by your children and pets.

To prevent nesting
Spray a 30cm band around/under planks, boulders, machineries, shoes, yards, particulary at the entry point.
During inital application, spray twice a week.
During maintenance, spray once per 2 weeks.
Increase spraying after rain or in dusty environment.

To prevent snakes & scorpions from coming to tents
Spray a 30cm band of around the base of tent and on the tent.

To stop potential snake attack or chase away snake
Stand at least 2m away from snake. Aim & spray directly at snake’s head for 5 Secs. The powerful cone of spray will frighten snakes to flee.

Warning!! Some snakes (Cobra) can spit venom to 2m distance. Snakes should be left alone, except for snakes that poses an immediate danger to people or pets. Most snakes are shy creatures and will slitter away without causing harm.

During Maintenance, spray twice per month.
Increase spraying after rain or in dusty environment.

COMMON MISCONCEPTION
**Snake and Scorpion Repellent is based MAINLY on product coming into contact with target pest. UV light, rain or dusty environment will greatly lower product‘s efficacy.

Why are Snake & Scorpion’ activities still high after spraying?

(1) Sprayed coverage area is too little. Snakes and scorpions simply avoid the sprayed areas and enters through lesser sprayed areas.

(2) Poor Sanitation. Food source is still readily available. Food waste not bagged, tied, and disposed of in refuse bins and left overnight will attract rodents which is food source for snakes.

DISCLAIMER
This product is a tool to control/prevent/reduce unwanted snake bites, centipedes, scorpion stings particularly to workers, campers & hikers. No single product can guarantee 100% protection.

Do note that direct sprayng onto the target creatures will harm it.

These creatures are part of the eco-system and should be left alone if it does not pose any danger to you.

WE DO NOT GUARANTEE that one will not be attack while using our product.

Note:
NOT SUITABLE for polished wood, painted surfaces, leather or arcylic plastics. Test small area of sensitive surfaces for staining before wide scale application.

PRECAUTION! Handling Trapped snakes

Handling snakes can be potentially dangerous especially if you are not trained or prepared. Snakes can be poisonous and can spray venom from their glands located inside their mouth to escape. Always wear safety goggles, thick gloves and safety clothing when handling snakes. Uses of snake tongs can lessen the chance of contact with snakes and also gives a firm grip preventing the snakes from slithering away. Always exercise caution when handling trapped snakes as any trapped creatures can be highly aggressive.